BMW G 650 GS Sertao Скачать руководство пользователя

Страница: 52 / 133

tee that the motorcycle will rest
firmly on the stand.
Always check that the ground
under the stand is level and
firm.

Extend the side stand and prop
the motorcycle on the stand.

The side stand is designed
to support only the weight

of the motorcycle.
Do not lean or sit on the
motorcycle with the side stand
extended.

If the camber of the roadway
permits, turn the handlebars all
the way to the left.
On a gradient, the motorcycle
should always face uphill; se-
lect 1st gear.

Refuelling

Fuel is highly flammable. A
naked flame close to the

fuel tank can cause a fire or ex-
plosion.

Do not smoke. Never bring a
naked flame near the fuel tank.

Fuel attacks plastics, which
become dull or unsightly.

Wipe off plastic parts immediately
if they come into contact with
fuel.

Make sure the ground is level
and firm and place the motor-
cycle on its side stand.

The volume of the tank can
be utilised to the full only

when the motorcycle is propped
on its side stand.

Open the protective cap.

Use the ignition key to unlock
fuel filler cap

and pop the

cap open.

Fuel expands when hot.
Fuel escaping from an

overfilled tank could make its way

Riding

ProCarManuals.com

Содержание G 650 GS Sertao






































































































































Результаты поиска

Содержание G 650 GS Sertao

Отзывы:

Похожие инструкции для G 650 GS Sertao

Бренды по названию

Популярные бренды

BMW G 650 GS Sertao, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание G 650 GS Sertao

Отзывы:

Похожие инструкции для G 650 GS Sertao

Бренды по названию

Популярные бренды