BMW F 750 GS Скачать руководство пользователя страница 188

Страница: 188 / 348

182

ENGINEERING DETAILS

Driving stability

In RAIN riding mode, DTC in-

tervenes early to maximise

riding stability.

In ROAD riding mode, DTC

intervenes later than in RAIN

riding mode. This prevents

the rear wheel from spinning

whenever possible.

In RAIN and ROAD riding

modes, the front wheel is pre-

vented from lifting.

In DYNAMIC riding mode,

DTC intervenes later than in

ROAD mode, so slight drift

can be induced when exiting

corners and brief wheelies are

also possible.

In ENDURO riding mode, the

DTC intervenes even later

than in the other modes and

the set-up is for off-road rid-

ing, so lengthy drifts and short

wheelies are possible when

exiting corners.

Mode changes

The riding mode can be

changed while the vehicle is

stationary with the ignition

on. Under the following

precondition, it is also possible

to change modes while riding:

No drive torque on the rear

wheel.

No brake pressure in the

brake system.

The following steps must be

taken to change the riding

mode:

Close the throttle twistgrip.

Release the brake levers.

Deactivate adaptive cruise

control.

The desired riding mode is ini-

tially preselected. The mode

change does not take place un-

til the systems in question are

all in the appropriate state.

The selection menu does not

disappear from the display until

the mode change has taken

place.

DYNAMIC BRAKE CONTROL

with riding modes Pro

Dynamic Brake Control

function

The Dynamic Brake Control

function assists the rider in

emergency braking situations.

Detection of emergency

braking

Sudden, sharp application of

the front brake is interpreted

as emergency braking.

Содержание F 750 GS





























































































































































































































































































































































Результаты поиска

Содержание F 750 GS

Отзывы:

Бренды по названию

Популярные бренды

BMW F 750 GS, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание F 750 GS

Отзывы:

Бренды по названию

Популярные бренды