2
27
Ma
in
te
n
a
n
c
e
a
n
d
ca
re
When tensioning the chain,
note correct wheel alignment
(marks on swinging fork arms).
To avoid damaging the chain or
more extensive damage,
always adjust the chain so that
it has the correct amount of
slack.
Do not damage the brake disk
or pads when fitting the wheel.
Do not damage the ABS sensor
cable
OE
, ABS sensor ring
OE
and
the speedometer sensor.
• Roll the rear wheel between
the rear swinging arm forks
and carefully position the
brake disk in the brake caliper.
• Lift chain
5
onto sprocket
6
• Grease quick-release axle
1
and insert it
• Install axle nut
3
with
washer
2
and hand-tighten
• Set chain tensioning screws
4
on left and right
such that
chain sag is correct
(setting
b
31) as stated on
label
7
OE
Optional equipment
Installing rear wheel
7
20r13bku4.book Seite 27 Montag, 29. September 2003 12:33 12