BMW Cevolution, Руководство пользователя для мотоциклиста

Страница: 112 / 156

for removing tar spots. Then add
a protective wax coating to the
paint at these locations.
Protective wax coating
BMW Motorrad recommends
that you apply BMW Car Wax or
another wax containing carnauba
or synthetic wax additives to pro-
tect the paintwork.
When water fails to form beads
on the paint surface this indicates
it is time to apply wax.
Removing the E-
Scooter from operation
NOTICE
Do not leave the vehicle with a
low charge for an extended pe-
riod of time. Before extended
idle periods, consult the charge
status indicator to ensure that
the high-voltage battery is fully
charged.
NOTICE
Check the charge level on a
regular basis. The high-voltage
battery will be damaged if the
charge is too low.
NOTICE
Do not park vehicle longer than
14 days if the electrical range
is less than 7 miles. If leaving
idle for up to three months, park
the vehicle when it has a full
charge.
Cleaning the E-Scooter.
Start charging procedure
(
61).
Removing 12V battery ( 97).
Spray the brake lever, tilt and
side stand mounting with suit-
able lubricant.
Protect metal and chrome-
plated parts with an acid-free
grease (Vaseline).
Park E-Scooter in a dry room,
raising it to relieve the weight
from both wheels.
Putting the E-Scooter
into operation
Remove the protective wax
coating.
Cleaning the E-Scooter.
Inserting 12V battery ( 97).
Observe checklist ( 69).
11
110
z Care