BMW C 650 Sport, Руководство пользователя для мотоциклиста

Страница: 84 / 170

General instructions
The "Maintenance" chapter de-
scribes work involving the check-
ing and replacement of wear
parts that can be performed with
a minimum of effort.
If special tightening torques are
to be taken into account for
assembly, these are listed. An
overview of all required tightening
torques is contained in the
chapter "Technical Data".
Information on additional
maintenance and repair work is
provided in the repair instructions
for your vehicle on DVD, which
you can obtain from your
BMW Motorrad partner.
Special tools and thorough spe-
cialized knowledge are required
to carry out some of the work
described here. If you are in
doubt, consult an authorized
workshop, preferably your au-
thorized BMW Motorrad retailer.
Standard tool kit
1 Hook wrench
Adjusting spring preload
at rear wheel (
61).
2 Torx wrench T30
Checking engine oil level
(
82).
Topping up coolant
(
90).
3 Spare fuses with gripper
Miniature fuses: 4 A,
7.5 A, 10 A and 15 A
Replace the fuses.
4 Open-ended wrench
Wrench size: 8/10 mm
4 Removing battery
(
108).
5 Reversible screwdriver in-
sert
Phillips PH1 and Torx T25
Remove body panels.
Replacing rear turn indi-
cator bulb (
104).
Removing battery
(
109).
Engine oil
Checking engine oil level
ATTENTION
Incorrect oil level display af-
ter long immobilization pe-
riod caused by oil collecting
in the oil sump instead of the
oil tank
Misinterpretation of the oil capac-
ity
Only check the oil level after
a longer journey or when the
engine is warm.
8
82
z Maintenance