BMW BMW M2 COMPETITION, Руководство пользователя, Страница: 252 / 278

The tow fitting can be screwed in at the front or
rear of the vehicle.
The tow fitting and the onboard vehicle tool kit,
refer to page
240 , are together in the cargo area.
Use of the tow fitting:
▷ Use only the tow fitting provided with the ve‐
hicle and screw it all the way in.
▷ Use the tow fitting for towing on paved roads
only.
▷ Avoid lateral loading of the tow fitting, for in‐
stance do not lift the vehicle by the tow fit‐
ting.
Safety information
NOTICE
If the tow fitting is not used as intended, there
may be damage to the vehicle or to the tow fit‐
ting. There is a risk of damage to property. Fol‐
low the notes on using the tow fitting.
Screw thread for tow fitting
Press on the mark on the edge of the cover to
push it out.
Tow-starting
M double-clutch transmission
Do not tow-start the vehicle.
Tow-starting the engine is not possible due to
the M double-clutch transmission.
Have the reasons for the starting difficulties cor‐
rected by a dealer’s service center or another
qualified service center or repair shop.
Manual transmission
If possible, do not tow-start the vehicle but start
the engine by jump-starting, refer to page
248 . If
the vehicle is equipped with a catalytic converter,
only tow-start while the engine is cold.
1. Switch on the hazard warning system and
comply with local regulations.
2. Switch on the ignition, refer to page 102 .
3. Engage third gear.
4. Have the vehicle tow-started with the clutch
pedal pressed and slowly release the pedal.
After the engine starts, immediately press on
the clutch pedal again.
5. Stop at a suitable location, remove the tow
bar or rope, and switch off the hazard warning
system.
6. Have the vehicle checked by a dealer's serv‐
ice center or another qualified service center
or repair shop.
Seite 252
MOBILITY
Breakdown assistance
252
Online Edition for Part no. 01402720665 - II/19