EN/21
Retrofit / Installation kit No. 65 12 0 029 883 (others see cover sheet)
Issue date: 05.2002
Installation Instructions No. 01 29 0 029 576
9.
To install the CD changer (cars with an on-board monitor and without a DSP amplifier only)
0
Connect the white 12-pin socket casing
E1
on
adapter cable
E
to the new generation radio
connection plug (30).
Connect the new generation radio connection
plug (30) and install the radio.
0
Remove the three transport guard screws (30)
from the CD changer (1) and seal the apertures
with the adhesive discs supplied (adhesive discs
are supplied with the CD changer).
Remove the two covers (31) and set the
adjustment mechanism (32) with a flat screwdriver
to
H
(horizontal installation) and then re-affix both
covers (31).
0
Secure both CD changer holders (8) to the CD
changer (1) with four fillister head Philips screws
(12).
0
Connect branch
A4
, black 3-pin socket casing on
the power supply cable
A
or the standard power
supply plug
X18180
to the plug casing on the
power supply connector (30) on the CD changer
(1).
Connect branch
C2
, black 6-pin socket casing on
the control cable
C
or the standard plug
X18729
to
the plug casing (31) on the CD changer (1).
E1
30
E
F 53 0780 B
V
H
V
H
1
32
30
31
31
F 39 0781 B
1
8
8
12
12
12
12
F 53 0782 B
C2/X18729
31
30
A4/X18180
1
F 53 0783 B