BMW 520D BROCHURE 2009, Руководство пользователя

Страница: 132 / 203

132 n
Load area – touring
Folding rear seat back
Reach into the recess and pull forward
(arrow).
The rear seat back is divided into two
sections, one of them one-third and the
other two-thirds of the total width. You
can fold down both sides to enlarge the
luggage area.
When the seat backs are returned
to the raised position again,
make sure that their catches engage
correctly. The red warning zone in the
recess then disappears.
The centre seat belt can only be pulled
out when the larger section of the rear
seat back is locked into position.
<
39
2de
75
3
Roller-blind cover
Pull out the roller cover and secure it in
the retainers at the back.
The cover can support the weight of
light articles, e.g. clothing.
Do not place hard or heavy
objects on the roller cover, since
they could endanger the car's occu-
pants in the event of sudden braking or
avoidance action.
Do not allow the roller cover to run back
too fast, as this could damage it.
<
For storage of the roller cover, see next
page.
39
2de
75
4
Protective net
Pull out the protective net by the loop,
holding the rod with your other hand.
Now grip both ends of the rod, pull
upwards and locate it in the retainers.
This is best done from the back seat.
Do not allow the protective net to
retract too fast, or it could cause
injury and itself become damaged.
<
When the rear seat backs are folded,
the net tube can be secured in front of
the rear seats, from which point the net
can still be pulled out and secured at
the front retainers (see next page).
39
2de
16
3
ba.book Page 132 Tuesday, December 17, 2002 4:26 PM