BMW 3 SERIES SPORTS WAGON, Руководство пользователя

Страница: 171 / 259

Cargo area partition net
WARNING
If the cargo net snaps back, it can cause
injuries or damage. There is risk of injuries or
risk of property damage. Do not let the cargo
area partition net snap back into place.◀
With a normal cargo area
1. Fold open the rear covers on the roofliner.
2. Pull the cargo area partition net out of the
case by the strap.
3. Insert the bars upwards into the brackets
on either side of the roofliner and push for‐
wards. This is best performed from the rear
seat.
If the cargo area partition net is no longer
needed: proceed in reverse order.
With an enlarged cargo area
1. Fold down the entire rear seat backrest.
2. Press button, arrow 1, to unlock the case
on both sides.
3. Pull the case up and out of the two side
brackets, arrow 2. Make sure not to tilt it in
the process.
4. Slide the case all the way into the guides,
arrows 1, on the backs of the backrests.
5. Fold open the front covers on the roofliner.
6. Quickly pull out the cargo area partition net
and insert it into the brackets as in the nor‐
mal cargo area, refer to page
171 . If the
cargo area partition net becomes blocked
when it is pulled out, allow it to retract and
then pull it out quickly again.
If the cargo area partition net is no longer
needed: press and hold button, arrow 1, and
push the cargo area partition net back, arrow 2.
Finally, slide the case into the two brackets on
the sides from above, until it engages. The red
warning fields disappear.
Seite 171
Interior equipment Controls
171
Online Edition for Part no. 01 40 2 966 156 - X/15