BMW 2013 S 1000R, Руководство пользователя для мотоциклиста

Страница: 33 / 190

Possible cause:
The license-plate carrier is re-
moved and the vehicle's elec-
tronic monitoring system detects
the missing turn signals.
Install license-plate carrier
(
85).
If the license plate car-
rier is removed for race-
track use, the vehicle's electronic
monitoring system will interpret
this as a defective lamp or bulb
and the corresponding warn-
ing message will appear in the
display. This warning message
is suppressed by activating the
EQIP WARN LAMP
function in
the
SETUP MENU
.
Motorcycle has fallen over
VDS!
(Vertical Down Sensor) is
shown in the empty display.
Possible cause:
The fall sensor has detected a
fall and switched off the engine.
Position motorcycle upright
Switch ignition off and then on
again or switch emergency ON/
OFF switch on and then off
again.
Fall sensor defective
VDS!
(Vertical Down Sensor) is
shown.
Possible cause:
A defect was determined in the
fall sensor.
Contact an authorized service
facility, preferably an authorized
BMW Motorrad retailer.
ABS self-diagnosis not
completed
ABS warning lamp flashes.
Possible cause:
ABS self-diagnosis not
completed
The ABS function is not avail-
able, as the self-diagnosis
function has not been com-
pleted. (To check the wheel
sensors, the motorcycle must
reach a minimum speed: min
3 mph (min 5 km/h))
Ride off slowly. It must be
noted that the ABS function
is not available until the self-
diagnosis has been completed.
ABS switched off
ABS warning lamp lights
up.
Possible cause:
The ABS system has been deac-
tivated by the rider.
Switching the ABS function on
(
51).
3
31
z Displays