BMW 2013 S 1000R Скачать руководство пользователя страница 103 | Manualshive

Страница: 103 / 190

BMW 2013 S 1000R Скачать руководство пользователя страница 103

When refueling after run-
ning on reserve, make sure

that you top up the tank to a
level above reserve, as other-
wise the sensor will not be able
to register the new level and the
fuel warning lamp will not be
switched off.

The "usable fuel quantity"
indicated in the Technical

data is the fuel quantity, which
can be refueled, if the fuel tank
was completely emptied, i.e., if
the engine dies off due to lack of
fuel.

Usable fuel quantity

Approx. 4.6 gal (Approx.
17.5 l)

Reserve fuel quantity

Approx. 1.1 gal (Approx. 4 l)

Press fuel tank cap down firmly
to close.
Remove key and close protec-
tive cap.

Fastening motorcycle
for transport

Protect all component surfaces
against which straps are routed
against scratching. For exam-
ple, use adhesive tape or soft
cloths.

The motorcycle can tip
away to the side and fall

over.

Secure motorcycle against tip-
ping away to the side, prefer-
ably with the help of a second
person.

Push motorcycle onto transport
surface, and do not place on
side stand.

Components can be dam-
aged.

Do not pinch components, e.g.
brake lines or wiring harnesses.

Lay straps at front over lower
fork bridge on both sides.
Tension straps downward.

6

101

z

Riding

«
...
101
102
103
104
105
...
»

Содержание 2013 S 1000R































































































































































































Отзывы:

Нет отзывов