BMW Motorrad HP2 Megamoto, Руководство пользователя для мотоциклиста

Страница: 102 / 146

fully insulated crocodile clips at
both ends.
Jump-starting with a donor-
battery voltage higher than
12 V can damage the motorcycle
electronics.
The battery of the donor vehicle
must have a voltage of 12 V.
Removing seat ( 50)
When jump-starting the engine,
do not disconnect the battery
from the onboard electrical sys-
tem.
Run engine of donor vehicle
during jump-starting.
Begin by connecting one end
of the red jump lead to the
positive terminal of the dis-
charged battery
2 and the oth-
er end to the positive terminal
of the donor battery.
Then connect one end of the
black jump lead to the nega-
tive terminal of the donor bat-
tery, and the other end to the
ground of the vehicle with the
flat battery. If the battery of
your motorcycle is flat, use
spring-strut screw
1 as the
connection to ground.
Start engine of the vehicle with
discharged battery in usual
way; if engine does not start,
wait a few minutes before re-
peating attempt in order to pro-
tect starter motor and donor
battery.
Allow both engines to idle for a
few minutes before disconnect-
ing jump leads.
First disconnect the jumper
cable from the ground con-
nection, then from the positive
battery terminal.
To start the engine, do not
use start sprays or similar
items.
Installing seat ( 50)
Battery
Maintenance instructions
Correct upkeep, recharging and
storage will prolong the life of
the battery and are essential if
warranty claims are to be consid-
ered.
8
100
z Maint
e
nance
ProCarManuals.com