BMW Motorrad G 310 GS Скачать руководство пользователя

Страница: 122 / 170

116

CARE

CARE PRODUCTS

BMW Motorrad recom-

mends that you use the

cleaning and care products

you can obtain from your

authorised BMW Motorrad

retailer. The substances in

BMW Care Products have

been tested in laboratories

and in practice; they provide

optimised care and protection

for the materials used in your

vehicle.

ATTENTION

Use of unsuitable cleaning

and care products

Damage to vehicle parts

Do not use solvents such

as cellulose thinners, cold

cleaners, fuel or the like,

and do not use cleaning

products that contain alco-

hol.

ATTENTION

Use of strongly acidic or

strongly alkaline cleaning

agents

Damage to vehicle parts

Dilute in accordance with

the dilution ratio stated on

the packaging of the clean-

ing agent.

Do not use strongly acidic

or strongly alkaline cleaning

agents.

WASHING THE VEHICLE

BMW Motorrad recommends

that you use BMW insect re-

mover to soften and wash off

insects and stubborn dirt on

painted parts prior to washing

the motorcycle.

To prevent stains, do not wash

the motorcycle immediately

after it has been exposed to

strong sunlight and do not

wash it in the sun.

Remove dirt from the fork legs

at regular intervals. Make sure

that the vehicle is washed fre-

quently, especially during the

winter months.

To remove road salt, clean the

motorcycle with cold water im-

mediately after every trip.

Содержание G 310 GS











































































































































































Результаты поиска

Содержание G 310 GS

Отзывы:

Похожие инструкции для G 310 GS

Бренды по названию

Популярные бренды

BMW Motorrad G 310 GS, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание G 310 GS

Отзывы:

Похожие инструкции для G 310 GS

Бренды по названию

Популярные бренды