8
Line up the holes in the trunk with the
holes at the end of the plate closest to
the backrest on the rack. Insert the 4
short screws and tighten using 12mm
socket.
The wing mirror mounting hardware
includes 2 weatherproof rubber seals,
2 locking washers, 2 spacers and 2
rubber screw caps
Slip the wires through one of the
weatherproof seals over the end of the
wing mirror
Connect the green and yellow wires
as shown. There will be one unused
wire coming from the moped.
Insert the screw into the hole in the
wing mirror with the lock washer.
Insert the spacer between the bolt
hole in the handlebar and wing mirror.
Screw down the wing mirror using the
supplied Allen Wrench
