BMS F-16C/D 4.34, Руководство по эксплуатации самолета, Страница: 105 / 234

T.O. BMS1F-16CM-1 BMS 4.34 Change 2.00
BMS 4.34 Dash 1
© Red Dog 2012-2019
Page: 105
Once you are satisfied with the configuration you can save your DTC. The MFD settings will be saved
in your
callsign.ini file and will be available to you (from the moment the DTC is loaded in the 3D
cockpit) as long as you use the same logbook.
You can also setup your DTC using Weapon Delivery Planner
http://www.weapondeliveryplanner.nl/ .
Recommended DTC settings for the MFDs
Here is a suggestion on how to set the MFDs. You are free to use your own configuration or use this
as a base to build your own:
A-A:
Left MFD (1): FCR
– blank – blank (current = primary for FCR)
Right MFD (2): HSD
– SMS – blank (current = primary for HSD)
You don’t risk losing the FCR on the left MFD with an inadvertent press of DMS left thanks to the two
empty pages.
A-G:
Left MFD (1): FCR
– TGP – blank (current = primary for FCR)
Right MFD (2): HSD
– SMS – blank (current = primary for HSD)
NAV:
Left MFD (1): FCR
– TEST – blank (current = primary for FCR)
Right MFD (2): HSD - SMS
– blank (current = primary for HSD)
MRM:
Left MFD (1): FCR
– blank – blank (current = primary for FCR)
Right MFD (2): HSD
– SMS – blank (current = primary for HSD)
DGFT:
Left MFD (1): FCR
– blank – blank (current = primary for FCR)
Right MFD (2): HSD
– SMS – blank (current = primary for HSD)