Operation
EASY- CHECK FN
Manual
Rev:00
3 / 10
Introduction
Congratulation ! You really made a good choice to decide for
Easy-Check FN
,
because this device is not only designed and manufactured according
to the latest level of technology, but also is extremely comfortable and easy to operate.
We tried our best to write this manual as clear and short as possible. For any further in-
formation you may need, please contact our Service Department. Our technicians are al-
ways ready to help you.
What can you measure with EASY-CHECK FN ?
On iron and steel (FE) all non-magnetic coatings, such as varnish, paint, plastics,
enamel, rubber, ceramics and galvanization (except niquel) up to 5,0 mm.
On non-ferrous metals (aluminium, brass, bronze, zinc, lead, copper and non-
magnetic steel) all non-conductive coatings, such as varnish, paint, plastics, rubber
and anodizing up to 2,5 mm.
And in addition you can also measure paint coatings on zinc plated steel without
considering the zinc thickness.
In addition EASY-CHECK FN includes the following features
•
Store up to 1000 readings in the data memory
•
Display
statistics
•
Transfer all readings and statistics to a printer or computer by means of the
interface, or just
•
Transfer the data by RADIO.
All these functions can be performed with the red key.
And This Is Really Unique
The device recognizes by itself on which base material the measurement is taken, whether
on steel (FE) or on non-ferrous metal (NFE) and displays the symbol with each reading.
EASY-CHECK FN can measure up to 80 hours with only one 1.5V Mignon battery.
Worldwide the only device with a swinging measuring probe allowing to measure inside
pipes and in other inaccessible places.
Short Instructions
To make it as easy as possible for you and to be able to start taking measurements imme-
diately, we have already calibrated the device.
You receive the instrument ready for operation and do not need to perform any ad-
justments.
You just switch on the device with the red key. In the display
appears <on>.
That´s all and now you can start taking measurements.
