BMS Beast 1000 Series Скачать руководство пользователя

Страница: 82 / 114

MAINTENANCE

WARNING

VEHICLE IMMERSION

If it's impossible to take your vehicle to a dealer before starting it, follow the
steps outlined below:

1. Move the vehicle to dry land, or at the very least, to water below the

floorboard.

2. Dry any water present in the air box. Filter replacement is required if water is

present.

3. Dry any water present in the intake manifold.

4. Remove the spark plugs. Turn the engine over several times using the

electric start.

5. Dry the spark plugs and reinstall, or replace with new plugs.

6. Attempt to start the engine. If necessary, repeat the drying procedure.

7. Take the vehicle in for service as soon as possible, whether you succeed in

starting it or not. Your DW INDUSTRIES dealer can provide the required
service.

8. If water has been ingested into the CVT follow the CVT Drying procedure.

STEERING WHEEL INSPECTION

Check the steering wheel for specified freeplay and smooth operation at the
intervals outlined in the Periodic Maintenance Chart section.

1. Position the vehicle on level ground.

2. Lightly turn the steering wheel left and right.

3. There should be 0.8"-1.0" (20-25 mm) of freeplay.

4. If there is excessive freeplay or strange noises, or the steering feels rough or

“catchy,” have the steering system inspected by an authorized dealer.

If your vehicle becomes immersed, major engine damage can result if the

machine is not thoroughly inspected. Take the vehicle in for service before

starting the engine. Your dealer can provide this service.

Содержание Beast 1000 Series



















































































































Результаты поиска

Содержание Beast 1000 Series

Отзывы:

Похожие инструкции для Beast 1000 Series

Бренды по названию

Популярные бренды

BMS Beast 1000 Series, Руководство пользователя

Результаты поиска

Содержание Beast 1000 Series

Отзывы:

Похожие инструкции для Beast 1000 Series

Бренды по названию

Популярные бренды