BMS Beast 1000 Series Скачать руководство пользователя страница 55

Страница: 55 / 114

WINCH GUIDE

WARNING

1. Always inspect the vehicle, winch, winch cable and winch controls for any

signs of damage or parts in need of repair or replacement before each use.

Pay particular attention to the first 3 feet (1 meter) of winch cable if the winch
is being used (or has been used) for lifting an accessory plow assembly.

Promptly replace any worn or damaged cable.

2. Never operate a winch or a vehicle in need of repair or service.

3. Always apply your

vehicle’s park brake and/ or park mechanism to hold the

vehicle in place during winching. Use wheel chocks if needed.

Improper winch use can result in SEVERE INJURY or DEATH. Always follow

all winch instructions and warnings in this manual.

Each winching situation is unique.

• Take your time to think through the winching you are about to do.

• Proceed slowly and deliberately.

• Never hurry or rush during winching.

• Always pay attention to your surroundings.

• You may need to change your winching strategy if it is not working.

• Always remember that your winch is very powerful.

• There are simply some situations that you and your winch will not be able to

deal with. Do not be afraid to ask others to help when this happens.

Содержание Beast 1000 Series



















































































































Результаты поиска

Содержание Beast 1000 Series

Отзывы:

Бренды по названию

Популярные бренды

BMS Beast 1000 Series, Руководство пользователя

Результаты поиска

Содержание Beast 1000 Series

Отзывы:

Бренды по названию

Популярные бренды