BMS Beast 1000 Series Скачать руководство пользователя страница 80

Страница: 80 / 114

MAINTENANCE

WARNING

5. Reinstall the pressure cap securely. Use of a non-standard pressure cap will

not allow the recovery system to function properly. Your DW INDUSTRIES
dealer can provide the correct replacement part.

6. With the pressure cap securely installed, add coolant to the overflow bottle to

the recommended level. Reinstall the coolant bottle cap.

VARIABLE TRANSMISSION (CVT) SYSTEM

WARNING

Failure to comply with the instructions in this warning can result in severe injury

or death.

Do not modify any component of the CVT system. Doing so may reduce its

strength so that a failure may occur at a high speed. The CVT system has been

precision balanced. Any modification will cause the system to be out of

balance, creating vibration and additional loads on components.

The CVT system rotates at high speeds, creating large amounts of force on

clutch components. As the owner, you have the following responsibilities for

your own safety and the safety of others:

• Always follow all recommended maintenance procedures. Always look for

and remove debris inside and around the clutch and vent system when
replacing the belt.

• See your DW INDUSTRIES dealer, or other qualified person, for service

and repair assistance.

• This CVT system is intended for use on DW INDUSTRIES products

only. Do not install it in any other product.

• Always make sure the CVT housing is securely in place during operation.

BELT REPLACEMENT / DEBRIS REMOVAL

If a belt fails, always clean any debris from the duct and from the clutch and
engine compartments when replacing the belt.

1. Allow hot components to cool before performing this procedure.

2. Remove the engine access cover and thoroughly clean all debris from the

aluminum debris bracket and from the engine compartment.

Failure to remove ALL debris when replacing the belt could result in vehicle

damage, loss of control and severe injury or death.

Содержание Beast 1000 Series



















































































































Результаты поиска

Содержание Beast 1000 Series

Отзывы:

Бренды по названию

Популярные бренды

BMS Beast 1000 Series, Руководство пользователя

Результаты поиска

Содержание Beast 1000 Series

Отзывы:

Бренды по названию

Популярные бренды