BMS INVERTED BIOLOGICAL
4-2 Stage
4-2-2 Moving the specimen
Turn the knob of the mechanical ruler or use your hands directly to move the specimen to the position
you wanted, please.
★
be careful when you replace the objective,
please, especially after a short work distance
observation. Not let the objective to touch the stage inserted plate or the culture dish bracket.
4-2-1 Setting the specimen
（
fig.19and fig.20
）
Set the specimen in the center of the stage, please.
★
to obtain the best observe effect, please
select the containers, such as culture dish and
culture bottle, with the bottom thickness is
1.2mm, and the same thickness is also required
by the object slide when it is laid the specimen.
◎
using the
Φ
35mm culture dish
You can lay a
Φ
35mm culture dish on the stage
directly by using the standard center board
①
of the
stage.
◎ using the mechanical ruler
1. When using the 96bit or 24bit micro-titration
board, please fasten it tightly by the stage
clips②.
2. When fastening other model boards, please use
the following supplied brackets with
mechanical ruler:
● Terasaki bracket③ for Terrasaki board
● Culture dish bracket④ for Φ 35mm
culture dish
● Object slide bracket⑤ for object slide
andΦ54mm culture dish
3. Turning the transverse knob ⑥and lengthways
knob⑦, move the specimen to the required
position.
( Movement Range: 120
（
width
）×
78
（
Length
）
mm
)
11
图
19
图
20
1
2
3
4
5
6
7
