BMR SFU-0303 Series, Руководство пользователя

Страница: 16 / 48

SFU-0303 M a n u a l
E
- 16 -
6.7 19" Version: Mains and Spindle connection
Back side SFU0303-19" with spindle connector clamp terminal Picture 7
Spindle Connector - 9pin clamp terminal
Mains connection - 9pin clamp terminal
Pin Name Direction Function
1 +VFP Output Auxiliary voltage supply for active speed sensors 12V/50mA
2 SGND Ground for signals FP, PTC
3 FP Input Input for two/three wire-speed sensors
4 PTC Input temperature signal of spindle or as option KTY
5 W Output Spindle phase W
6 V Output Spindle phase V
7 U Output Spindle phase U
PE PE
PE PE
Connection for protective earth of the spindle.
! Safety !
Name Function
PE protective earth
! Safety !
N Neutral
L Phase
Sicherungsautoma
Spindle connection Mains Connection
Automatic Fuses
Spindle Interface I/O Interface
Control wires, Mains cables and spindle cables should be installed separately.
For wiring, the use of shielded cables is recommended.
Please ensure, that PE protective earth is connected at the spindle side as well as at the
mains side.
Please ensure, that PE protective earth is connected at the mains side. The device must
not be operated without properly connected PE!