BMPRO JHub, Руководство пользователя

Страница: 8 / 32

3. Battery Icon
Enables Sleep Mode the J35 will provide power to the CAN bus. This allows you
to continue to monitor battery consumption from the battery monitor. However,
power to the load terminal block will be turned off and you will not be able to use
your battery monitor to power caravan loads.
To exit Sleep Mode, start battery charging. The J35 will exit Sleep Mode
when the battery is sufficiently charged. Upon exit of Sleep Mode, the J35 will
automatically return to its previous state of operation.
When in Sleep Mode you may temporarily turn on caravan loads by cycling the
caravan’s Load Isolation Switch. This feature allows you to retract slide-outs or
electric steps should you need to pack your caravan. This temporary switch on of
the caravan loads may also be done by pressing the Battery icon on your battery
monitor.
4. Slide-In/Out Control
Where fitted, controls the caravan’s slide-in/out mechanism
5. Area 1 Master Light Switch
6. Area 2 Master Light Switch
7. Area 3 Master Light Switch
8. Hot Water Heater Switch
9. Water Pump Switch
10. Battery Status
11. Battery State of Charge
Indicator providing a visual display of the battery’s power capacity.
Displayed only if a battery is connected to the J35.
Table 2: Battery Status Indications
BATTERY STATUS
CHARGING
The J35 is charging the battery —
denoted by the lightning symbol
DISCHARGING
Indicates the caravan’s battery is being consumed and the
time remaining before the battery is completely discharged
IDLE
Indicates that no current is flowing
into or out of the caravan battery
8