7
OPERATION
In normal power-on mode the unit displays the Home screen. The various display elements of
the Home screen are described below.
DESCRIPTION OF DISPLAY ELEMENTS
Clock
This displays the time of day in 12-hour mode with AM/PM indication. To set the clock, refer to
Clock Setting on page 9.
Temperature
This displays the ambient or room temperature. The temperature sensor is located in the
bottom left corner of the unit.
Time Remaining
This is the time remaining in the battery if it continues to discharge at the current rate.
› If the remaining time is 2 hours or less, the display shows the remaining time in minutes.
› If the remaining time is greater than 2 hours, the display shows the remaining time in hours.
› If the remaining time is greater than 199 hours, the display shows “>199 HRS”.
› If the battery is charging, the display is blank.
Charge State
This is a multi-segmented bar graph showing the state of charge of the battery. Above the bar
graph is displayed the word “CHARGING” or “DISCHARGING” according to the charging state
of the battery. .
Amps
This shows the charging current into the battery or the discharging current from the battery. To
determine if it is a charging or discharging current it is necessary to refer to the Charge State
indicator to the left of this field.
Volts
This displays the battery voltage.
Fresh Water Tanks
These indicate the approximate water level in each of the tanks.
If a tank is not installed that tank indicator will always show empty (no level segments will be
shown).
When full, all level segments are shown.
When empty, the bottom level segment flashes and the other segments are not shown.
Note: If the pump switch is off, the water level displays are not updated; they continue to show
the levels from the last time the pump switch was on.
1
18
13
3
2
9
5
6
7
