After fitting a new battery to the BatteryPlus35-II, make sure that it is configured in
your battery monitor.
Correctly configuring the battery capacity and profile will ensure that the
BatteryPlus35-II will select the best charging parameters for the caravan battery in
use, and the software accurately estimates battery usage.
REPLACING BATTERIES
Figure 5: Wiring the battery to the
BatteryPlus35-II.
To protect against short-circuits and
reversed battery connections, install
a 40A fuse as close as possible to the
battery’s positive terminal.
WARNING
Before using a battery other than that which was installed at the caravan dealership,
consult with the battery manufacturer for a detailed description of the installation, uses
and maintenance of the battery. Verify that the type and capacity of the battery or batteries
used are compatible for use with the BatteryPlus35-II.
WARNING
Sparks have the potential to cause an explosion if combustible gases are present.
The following procedures are designed to minimise the risk of spark generation while
connecting or disconnecting the battery. The positive terminal of the battery
MUST NOT be
connected to the chassis
.
WARNING
Do not install a battery in the same compartment where flammable material is stored, such
as petrol.
20
More information https://www.caravansplus.com.au
