FAQS AND TROUBLESHOOTING
Need more help troubleshooting your BatteryPlus35-II?
Contact our customer service team online at
teambmpro.com/technical-support
or
check out our how-to videos on our YouTube channel at
youtube.com/c/bmproau
CARAVAN LOADS
I think one of my loads is not receiving power?
The load may be faulty, activating the protective electronic fuse and turning the
load o
ff
. If this is the case, the Load Status Indicator LED will be flashing red and the
System Status Indicator will be solid red.
Should you encounter any faulty loads, please contact your caravan dealership.
None of my loads appear to be powered but I can still use my battery monitor?
All loads will power down, but the battery monitor will still be in use if the
BatteryPlus35-II was put into ECO Mode.
The BatteryPlus35-II will be put into ECO Mode if:
1.
You have pressed the Battery icon on your battery monitor.
Check to see that the Battery icon on your monitor has been pressed, which turns
power o
ff
to the caravan loads.
2.
Battery voltage is low. The BatteryPlus35-II will enter ECO Mode to conserve
remaining battery voltage, which will disable power to caravan loads.
Connect the BatteryPlus35-II to a power source and begin battery charging.
BATTERY
I have fitted a battery to the BatteryPlus35-II, but it’s not detected by my BMPRO
battery monitor?
Check the following:
1.
The battery connections are tight and not loose or corroded.
2.
The battery polarity is correct: red lead is positive, black lead is negative.
3.
The dealership fitted in-line fuse with the caravan battery is fitted and not blown.
The correct value is 40A.
29
More information https://www.caravansplus.com.au
