7
INSTALLATION INSTRUCTIONS
The SwayControl is a safety device which is required to be installed in the
caravan/trailer by suitably qualified service personnel.
To operate correctly, the SwayControl must be securely fastened using all four
mounting holes hard up against the floor of a steel trailer.
Do not fasten the SwayControl to any other trailer surface that flexes or moves
from wind or road vibration.
MOUNTING LOCATION CONSIDERATIONS
The suggested location for mounting the SwayControl is on the first trailer frame
crossmember, approximately 0.3 to 3.0m behind the trailer hitching point.
The SwayControl must be mounted in the correct orientation (as indicated on
the label), on either the “leading” or “trailing” edge of the crossmember. The
“trailing” edge is preferred, as it provides the best protection from road debris.
WARNING
For proper operation of the SwayControl, ensure the electric brakes are adjusted and
maintained in accordance with the manufacturer’s recommendations in the electric
brakes owner’s manual.
WARNING
DO NOT spray high pressure water on the SwayControl. The SwayControl is a
weather sealed, water resistant unit, but it is not designed to withstand direct, high
pressure spray from a power washer.
Содержание 033362
Страница 1: ...TEAMBMPRO COM OWNER S MANUAL SwayControl ...
Страница 2: ......
Страница 5: ......
Страница 10: ...10 WIRING DIAGRAM ...