BMG Labtech spectrostar nano, Руководство по эксплуатации

Страница: 13 / 16

BMG LABTECH SPECTROstar Nano Operating Manual
2012-07-18 0601B0001C 13/16
3.1.3 Keypad Control
The Keypad Control of the SPECTROstar Nano consists of easy single push button operated pad controls
for the basic operation of the instrument (figure 3). Each button and its function are described below:
Figure 3: The SPECTROstar Nano Keypad Control
- POWER On/Off
Reader is OFF

Short click: reader will be switched On
Reader is ON

Double click: reader will be initialized (e.g. after error)

Long click: reader will be switched Off
LED Status

LED On green: reader is switched On and in standby

LED flashing green: reader is busy, e.g. measurement operation

LED flashing red: reader error has occurred
- MICROPLATE In/Out
Reader is in standby

Short click: microplate carrier will move In/Out

Long click (
≥ 3 sec): microplate carrier will move to transport lock position
- MICROPLATE Shake

First short click: pre-set 10 sec shaking (700 RPM, orbital), user definable

Second short click (while running): shaking will stop

Long click: shaking will be performed as long as button is pressed
- MICROPLATE Measure

Short click: starts test protocol which is assigned to the Re-Run button in the reader
Control Software

Double click (while running): test protocol will be stopped
- CUVETTE Blank

Short click: starts cuvette measurement ( 0/100% absorbance values)
- CUVETTE Measure

Short click: starts cuvette measurement which is assigned to the Cuvette Measure
button in the reader Control Software

Double click (while running): cuvette measurement will be stopped