AMS42-LAN16fx
Seite 12
8
Technical Data
(typical at 20°C, after 5min., +24V supply)
•
Analog Channels
Inputs (Measuring range):
8 amplifier inputs (
±
5V), 8 single-ended, non-amplified inputs (
±
10V,
±
5V,
±
2V,
±
1V)
Measuring range // Noise:
±
10V //
±
5 LSB
±
5V //
±
7 LSB
±
2V //
±
8 LSB
±
1V //
±
8 LSB
Sampling rate // Resolution:
max. 250kHz total sampling rate* // 16 bit
Abs. accuracy // Memory depth:
±
2.5mV // only depending on the size of the hard disk of the server PC
Surge protection:
±
35V (when turned on),
±
20V (when turned off), max.
±
20mA in total of all input channels!
Input resistance // Input capacity:
1M
W
(with PC turned off: 1k
W
) // 5pF
Zero shift // Gain drop:
±
50ppm/ C //
±
50ppm/ C
Frequency accuracy // Frequency drift:
max.
±
100ppm // max.
±
50ppm/ C
Outputs // Output range // Output cur-
rent:
2 voltage outputs (16 bit) //
±
10V // max. 1mA
Galv. isolation (to PC // to each other):
all analog channels electrically isolated to the PC // amplifier inputs: depends on the 5B modules used
* The total sampling rate is the sum of the sampling rates of the individual used channels (e.g. if 5 channels are scanned with 1kHz, the total sampling
rate adds up to 5kHz).
The values for accuracy always relate to the respective measuring range. Errors might add at worst.
•
Digital Channels
Channels // Level:
16 Digital IN, 16 Digital OUT // CMOS/TTL compatible (low: 0V..0.7V; high: 3V..5V)
Counter:
19-bit counter, up/down counter or incremental encoder; connect at digital pins
Resistance R
i
// Output current:
Digital IN: 10k
W
, Digital OUT: 1k
W
// 0.5mA
•
General Data
Power supply:
+12..40V DC, ±5%, min 3W, max. 20W (depends on number of 5B modules used) at 3-pin DIN plug
Analog connections:
amplifier inputs: different connectors (Phoenix, Binder, BNC, Thermo) on the front panels
of the cassettes; other analog channels at a 37-pin D-Sub female at the device back
Digital connections:
all channels at a 37-pin D-Sub female at the device front
LAN connection:
Twisted Pair RJ45 connector, 100Mbit
CE standards:
EN61000-6-1, EN61000-6-3, EN61010-1; for decl. of conformity (PDF)
ElektroG // ear registration:
RoHS and WEEE compliant // WEEE Reg.-No. DE75472248
Max. permissible potentials // Protection:
60V DC acc. to VDE
, max. 1kV ESD on open lines // IP20
Temperature ranges // Relative humidity:
operating temp. -25..50 C, storage temp. -25..70 C // 0-90% (not condensing)
Dimensions (W x H x D):
23,5cm x 13,2cm x 25,6cm
Delivery:
device
Available accessories:
plug-in cassettes with front panels and different connectors of the AMS-K series,
8-channel extension AMS-EXT8 for add. 8 amplifier inputs, extension AMS-DIG8 for 8 optocoupler inputs and
8 relay outputs, D-Sub plug ZU37ST, 3-pin DIN socket ZU3DIN, gender changer ZU37SS, connecting cables
ZUKA37SB/SS (D-Sub), ZUKA-TP (Twisted Pair), desktop power supply
ZU-PW40W (24V, 1.67A DC), carrying handle AMS-HANDLE2
Warranty:
2 years from date of purchase at bmcm, claims for damages resulting from improper use excluded
•
Software
Software free of charge download:
LIBAD4 SDK for C/C++ programming on Windows
®
XP/7/8/10, Mac OS X, FreeBSD, Linux; trial version of
measuring software NextView
®
for hardware test & operation; config. software LAN-Admin
NextView
®
(optional):
professional software (versions: Professional, Lite) for the acquisition and analysis of measurement data on
Windows
®
8/10
Manufacturer: BMC Messsysteme GmbH. Subject to change due to technical improvements. Errors and printing errors excepted. Rev. 4.3
02/05/2020
Via Paolo Uccello 4 - 20148 Milano
Tel +39 02 48 009 757 Fax +39 02 48 002 070 [email protected] www.dspmindustria.it
