InH2
®
Heated Humidifier
User Manual V2.7
4/13
English
Daily Use
1. Fill the chamber to the fill line with water (approx. 350 ml) from the outlet
port. Distilled water is recommended. Do not overfill the water chamber.
CAUTION!
Always remove the chamber from the humidifier before filling with water.
2. Press down the spring loaded heater plate with the water chamber and slide
the chamber into place. Make sure the rubber connector on the inlet port fits
securely over the
RESmart
®
device’s air outlet.
3. Connect the flexible tubing to the outlet port on the water chamber.
CAUTION!
Avoid moving or tilting the humidifier when the water chamber has water in it.
4. When the RESmart
®
device begins blowing, the humidifier will work
automatically. The yellow indicator light on the humidifier will turn on. Press
the humidifier button can turn off or restart the humidifier.
5. The ideal humidity setting depends on room temperature and humidity.
Initially, a setting of 3 is recommended. You can adjust this setting at any time.
Please adjust the humidifier setting according to the CPAP User Manual.
IMPORTANT!
When the air flow is turned off, the humidifier will automatically shut off.
Cleaning
The water chamber should be cleaned daily or after each use.
WARNING!
Emptying and cleaning the water chamber daily will help to prevent mold and
bacteria growth.
WARNING!
Allow the water in the chamber to cool down to room temperature before
removing it from the humidifier.
WARNING!
To avoid electrical shock, disconnect the power cord of
RESmart
®
device
before cleaning the humidifier. DO NOT immerse the humidifier into any fluids.
