BMC E-20A-H-O, Руководство пользователя

Страница: 21 / 118

E-20A-H-O / E-20AJ-H-O User Manual V2.1
17 / 36
Eng
lis
h
• A FUNCTIONAL TESTER cannot be used to assess the ACCURACY of the SpO
2
Kit.
• Do not use the SpO
2
Kit during MRI scanning.
• Do not use the SpO
2
Kit if it appears damaged.
• Do not immerse the SpO
2
Kit as it causes short.
• SpO
2
Kit should only be connected or disconnected with the device unplugged or powered off.
11.8 Using the H60 Heated Humidifier
The H60 Heated Humidifier is available from your home care provider. The humidifier may
reduce nasal dryness and irritation by adding moisture (and heat if applicable) to the airflow.
For detailed information about the heated humidifier, please see the user manual for the
heated humidifier.
11.9 Starting Treatment
Connect the device to a power outlet, press the Knob , and the device will start delivering
air.
WARNINGS!
• Be sure to follow your physician’s instructions on adjusting the settings! To order any
accessories not included with this device, contact your equipment supplier.
• DO NOT connect any ancillary equipment to this device unless recommended by BMC or your
physician. If you suffer from chest discomfort, shortness of breath, stomach bloating, or severe
headache when using the device, contract your physician or qualified medical personnel
immediately.
12. Routine Use
12.1 Connecting the Tube
Connect the power cord, power adapter, and tube properly according to the instructions in the
First Time Setup (Chapter 11). Connect the mask and headgear according to the user manual
for the mask.
CAUTION!
• Before each use, examine the tube for any damage or debris. If necessary, clean the tube to
remove the debris. Replace any damaged tube. Make sure that the mask does not leak.
12.2 Adjusting the Tube
Lie down on your bed, and adjust the tube so it is free to move if you turn during sleep. Adjust
the mask and headgear until you have a comfortable fit and until there are no airflow leaks into
your eyes.
12.3 Turning on the Airflow
Press the Knob to turn on the airflow. The screen will display treatment pressure and
other information.