BMB e-mo-desk Скачать руководство пользователя страница 5

BMB

e-mo-desk, two engines, 600-1250mm / 700-1200mm
Art.-No. 4884.617, 4884.618, 4884.666, 4884.688, 
4884.717, 4884.718, 4884.766, 4884.788

5/10

6.  Your desktop may or may not be pre-drilled. Check both sides 

of the desktop before placing the desk base on the underside 

of the desktop.

Adjust the width of the desk base to fi t the desktop by sliding 

the two halves outward. We recommend leaving at least 1/2" of 

the desktop width (on each end) protruding beyond the frame 

width and centering the Side Brackets   fore and aft.

7.  If the desktop is pre-drilled, perform Step 8 before Step 7. If the 

desktop is not pre-drilled, lock the position of the Center Rails 

 using eight M6x10 Machine Screws  .

8. 

 Double-check that the wood screws are not too long for 

your desktop and won't puncture the surface when screwed 

all the way in. Double-check that the desk base is properly 

positioned on the underside of the desktop. 

Attach the desk base to the underside of the desktop using 

eleven 5x20 Wood Screws  .

Attach the Handset   so the front of the handset is flush with 

the front desktop edge (or recessed up to 4 mm). The handset 

may be placed anywhere along the front edge of the desktop 

but we recommend placing it toward an end so it does not 

interfere with your chair when seated. Use two 5x16 Wood 

Screws  to attach the handset to the desktop.

 Do not overtighten screws in this step. Overtightening could 

cause damage to the components.

9.  Slide the Control Box   onto the Frame End-CB  . Connect 

the cable  exiting the Leg   that is attached to the Frame 

End-CB   directly into the Control Box  . Connect the Cable

 to the other Leg   and to the Control Box  . 

Connect the Handset   cable to the Control Box  .

Connect the Power Cord   to the Control Box  .

Use the adhesive-backed Cable Clips   to secure the cables 

so they do not sag.

 

We recommend that you pre-drill any holes needed for 

fasteners if your desktop is not pre-drilled. Never use 

countersunk screws.

Содержание e-mo-desk











Отзывы: