BMB MEDICAL
–
CARVI
–
2VCRCO022022
65
3
CLEANING
AND
DISINFECTION
3.1
INTRODUCTION
Regular and correct cleaning ensure the product's life service (see cleaning program prepared
upon commissioning of the device by appointing the reference personnel).
If the cleaning operations are not carried out, this may cause a risk of infection due to the
presence of secretions and/or residues on the stretcher-trolley.
The following cleaning recommendations do not replace your establishment's internal protocol.
3.2
FREQUENCY
The cleaning shall be performed:
-
After each patient i.e. between two patients.
-
After transporting an infected patient.
-
Entirely on a weekly basis
3.3
CLEANING
AND
DISINFECTION
ADVICE
3.3.1
CLEANING OPERATION
Before cleaning the chair, unplug it from the mains and ensure that all internal connections
are correctly established.
For routine cleaning of the upholstery, painted stainless steel or aluminum surfaces, plastic parts
and control elements, a gentle detergent such as soapy water may be used, followed by rinsing
with clear water. After cleaning, dry the product thoroughly.
All of the product’s surfaces must be cleaned.
During cleaning or disinfection, it is recommended to:
-
Spray or apply the cleaning product to the MD with a clean disposable cloth.
-
Start with the areas closest to the patient, focusing on parts in contact with users.
-
Proceed from top to bottom.
-
Allow the equipment to dry.
Products that cause stains (e.g.: “blue product” or eosin) must
be cleaned as rapidly as
possible to prevent them from soaking in.
Aerial disinfection of surfaces is allowed for this product.
