bmb-home TOUCH SCREEN REMOTE, Руководство пользователя, Страница: 19 / 76

PN#033000=13460A URTSRF rev. 01-10-06 18
3. Release Setup key.
4. Press and release the Touchscreen "CODE" Key.
5. Display will show the Mode Setup Screen. Press and release X10
Home
Automation key
.
6. Display will show the Code Setup Screen. Enter 820.
7. Press and release the Touchscreen "EXIT" key to return to normal
operation.
15) EXTRA FUNCTIONS :
1. Keypress Acknowledge Beep Feature :
It is possible to get an audible feedback of key-presses. When any
key is pressed, the remote will generate a beep acknowledging the
keypress. The Keypress Acknowledge feature can be toggled on or
off as follows :
1. Press and hold Setup key until the LED remains on (occurring
after approximately 2-3 seconds) and the Main Setup Screen is
shown.
2. Release Setup key.
3. To disable the beep, press and hold the rubber Stop key until the
LED blinks. To enable the Beep, press and hold the rubber Play
key until the LED blinks.
4. Beep Feature now toggled On or Off and the Main Setup Screen
is shown.
2. LCD Panel & Backlight On-Time :
The LCD Panel display and Backlighting will remain on for a User
selectable time period (10, 20, 30,……90 seconds). Power-on
default is 30 seconds from last keypress. To set the LCD/Light On
time :-
1. Press and hold Setup key until the LED remains on (occurring
after approximately 2-3 seconds) and the Main Setup Screen is
shown.
2. Release Setup key.
3. Press and release the Setup key. The LED will blink to
acknowledge the keypress and the “9” Digit Setup Screen will be
shown.
4. Press and release a digit key 1-9 (1=10 seconds, 2=20seconds,
etc). The LED will blink to acknowledge the keypress and the
display will return to the Main Setup Screen.
5. LCD/Light On time setting now complete.
3. User Master Reset :
To reset the remote defaults back to factory settings.
1. Press and hold Setup key until the LED remains on and display
shows the Main Setup Screen.
2. Release Setup key.
3. Press and hold the Setup key for approximately 5 seconds until
the LED blinks on then turns off.
4. Default Reset now complete and remote will be in normal TV
Mode.
4. Channel Scan/Search Key (LCD) :
The Channel Scan/Search function is only available in TV, DVD,
CBL/SAT and CD/Audio Modes. Pressing the LCD “SEARCH” Key
allows the User to sequentially scan up available program channels.
This key cannot be learned.
When pressed, a Channel Up command for the Current Mode code is
sent once every 3 seconds. When any other key is pressed the scan
will stop. Scanning will automatically time-out after 2 minutes if no
key is pressed.
5. VideoPlus/Showview Key (LCD) :
This key allows the User to directly access their VCR VideoPlus or
Showview function if the feature is available on their VCR. If
VideoPlus or Showview feature is not available then this key will
allow direct access to any VCR Timer or Menu operation (if present)