bmb-home TOUCH SCREEN REMOTE, Руководство пользователя, Страница: 16 / 76

PN#033000=13460A URTSRF rev. 01-10-06 15
1. Press and hold Setup key until the LED remains on (occurring after
approximately 2-3 seconds) and display shows the Main Setup
Screen.
2. Release Setup key.
3. Press and release the LCD “SCREEN” Key.
4. Display will show the Mode Setup Screen. Press and release
desired Mode key (TV, VCR, SAT, etc.) on the rubber keypad.
5. Display will show the SCREEN Setup
Screen. This screen comprises the current
screen labels for the Mode plus the SETUP
and SCREEN LCD labels will be shown.
You can now press any of the LCD panel
keys within the current Mode to select the
individual key label display required. Use
the “SCREEN” Key to toggle the screen
keys displayed. To Exit, pressing the Setup
or Mute keys will save changed key label
selections and display returns to the Main
Setup Screen. If you want to edit another
Mode’s key labels then press the other
Mode key - the Mode you were in is saved
and display changes to the new Mode for
any Label changes.
6. Key Label change routine now complete. Press and release the
LCD “EXIT” key to return to normal operation.
Notes :
1. To reset the displayed Modes key labels back to their Default
settings, press and hold the current Mode key for approximately
3 seconds at Step 4 above until the Main Setup Screen is
shown.
2. These labels are not displayed as part of the Key Label change
routine – “SLEEP”, “SETUP”, “MACRO”, “LEARN”, “P<P”,
“KEY?” and “SEARCH”.
13) Code Learning :
It is possible to learn IR commands (up to 40 keys per Mode) from
your original remote.
Tips On Learning :
1. Always use of fresh batteries for the Touch Control and original
remote
2. Carry out a Master Reset before attempting any Learning. Note
this will reset all User programming back to factory defaults.
3. Place the original remote to the base of the Touch Control so the
IR LED on the original remote is in line with the Touch Control opto-
diode input (See graphic below).
4. Keep the distance between the two remotes to about 5 cm.
5. Experiment by Learning 2 or 3 keys initially and then carry out a
Master Reset before completely Learning your original remote’s
keyboard.
6. Do not attempt to Learn directly under an incandescent or low-
energy light.
7. When Learning a key, do not release the key being Learned until
the display returns and the LED remains on. This can take 2-3
seconds.
8. No functions may be stored under the LCD SCREEN, SLEEP,
P<P, SEARCH keys or under rubber keys Setup, Macro, TV, VCR,
DVD, CBL, SAT, CD, AUX or Audio keys. It is not possible to learn
under “shifted keys”.
Setup Screen - SCREEN
SEARCH
SETUP
EXIT
SV/V+
MENU
SCREEN
KEY?
OK
0
7 9
4 6
2
8
5
3 S
LEVEL
MACRO DSP EFFECT
LEARN
VCR TV DVD
STB TUNER TAPE
CD AUDIO DISC
USER1 USER2
CODE
MODE A B
REPEAT ENTER
FAV
T-C
SLEEP
10
P<P
GUIDE
i
AV
AUX