18
Bmax Technology
-
A Division of Elmec Group S.r.l.
Locality: Cà D’Oro
36020 - Asigliano Veneto (VICENZA) - ITALY
TEL. +39 0444-772023 - FAX +39 0444-773129
E-mail: [email protected] - Web: www.b-max.com
Elmec Group S.r.l. Tax code and VAT no.: 03725780245
B-MAX BOILERS
5.4 SPECIAL MAINTENANCE
Cleaning the Heat Exhangers:
1.
Open all 3 doors as shown in the diagram
2.
Scrape the exchangers indicated with the arrow (1) using the special brush
supplied with the boiler
3.
Vacuum out the ask from the ash pan, as shown by the arrow (2)
MAINTENANCE
ENGLISH
3
Bmax Technology
-
A Division of Elmec Group S.r.l.
Locality: Cà D’Oro
36020 - Asigliano Veneto (VICENZA) - ITALY
TEL. +39 0444-772023 - FAX +39 0444-773129
E-mail: [email protected] - Web: www.b-max.com
Elmec Group S.r.l. Tax code and VAT no.: 03725780245
B-MAX BOILERS
1.0 SAFETY
1.1 GENERAL WARNINGS
!! CHECK THAT THE CHIMNEY FLUE HAS SUFFICIENT DRAW BEFORE CONNECTING IT
TO THE SMOKE EXHAUST ON THE BOILER
Always use the safety devices and individual protection devices required in accordance
with EEC Directive 89/391
Disconnect the power supply before carrying out any operations.
Always use suitable tools.
Before starting any work, make sure that the combustion chamber is cold and that the ash
is cold. Also wait for the opening handles to cool down before touching them
No inflammable material should be stored near the Boiler
!!!CAUTION
ENGLISH
No modifications to the Boiler may be made without written
consent from the manufacturer
Only use original spare parts or parts approved by the
manufacturer to avoid possible damage to the Boiler
Do not open the Boiler doors while the burner is working
Check for the presence of condensation: this is the sign of
possible water infiltrations or of exhaust cooling. It is advisable
to identify the possible causes to restore correct functioning
DO NOT USE the Boiler if even one part is defective or is not
working
Always clean the combustion brazier of the burner before
ignition (See Burner manual)
SAFETY
