KAPTOR
MINI
–
User Manual
–
V0.1 - pg.21
Main
Application
Medium and Long term monitoring activities (6/12 months) with sensors connected to
RS485. Elevate sampling frequency: < 5 minutes. Data transmission: frequency < 12 hours
6.2.1
Battery charging
Battery must be charged only with our battery charger, by following these steps:
1.
Connect the battery charger cable to the battery case;
2.
Connect the network cable (220Vac) to the battery charger and to a standard mains socket;
3.
LED1 on battery charger: RED = battery charger is working;
4.
LED2: RED= battery is charging;
5.
When LED2 turns GREEN, battery is completely charged;
6.
When charging is complete, disconnect the battery charger form mains and then remove all the
used connectors and cables.
Full battery charging procedure can last up to 12 hours, depending form the battery charging
status.
If you plan not to use the battery for a long time, disconnect it from the device and carry on a
maintenance charge of 2 hours every 3 months.
This procedure guarantees its efficiency and preserves its lifetime.
When the battery is completely down, charge it in max 7 days, otherwise it could be damaged
and not reusable.
