KAPTOR
MINI
–
User Manual
–
V0.1 - pg.17
5
Case opening and closure
In standard operating conditions, it is not necessary to open or close the
KAPTOR
MINI
case.
But it could be in these cases:
✓
Primary battery replacement
✓
SIM card Installation/replacement/removal
✓
Data transmission Antenna replacement
If necessary, unscrew the collar external clamp nut and use the quick-release system to remove the
device.
Once the clamp is removed, separate the two parts of the case. The O-rings guarantee the degree of
protection IP68 so it is completely normal to find resistance in this phase. If so, you can help yourself by
levering with two flat screwdrivers.
To close bring the two parts of the case closer so that they fit together. Pay attention to any wires: do not
press them between the parts of the case itself or of the internal components. Install the locking collar
and tighten the nut.
The correct tightening is done by applying a force of 9Nm and, in any case, when the two parts of the case
come into contact.
Before closing the case you have to check if all connectio
ns (internal battery, antenna…) are
ok.
A torque wrench can be supplied by B.M. Tecnologie Industriali on request.
