Bjong
–
User Manual
–
V1.0 - pg.60
Host name/IP
: server address for sending data in HTTP.
Host port
: port for connection to the server.
Data page
: this is the page to which the data stored on the
instrument are sent.
Settings page
: this is the page to which the instrument
configuration data are sent.
Date synch. page
: page used to perform a date
synchronization. In this way multiple tools can have a unique
date. This is essential in measurement campaigns where
multiple measurement points need to be compared.
Message page
: this is the page to which alarm messages are
sent.
FTP mode
: you can choose between the standard mode
(also called PORT or active) and passive (or PASV).
FTP name/IP, FTP port
: data needed to reach the server.
FTP User, FTP Password
: needed if the server request for
authentication.
FTP dir
: folder on server in which CSV files are loaded.
FTP time out
: time, in seconds, of inactivity necessary
before considering connection closed or lost.
MQTT name/IP
: server address for sending MQTT
messages.
Port
: port for connection.
User, password
: credentials for connecting to the MQTT
broker.
QoS, retain, time out, keep alive, clean session
: you can
choose the typical configuration parameters for
communication with the MQTT broker.
