Bjong
–
User Manual
–
V1.0 - pg.59
12.11
Communication
This section contains all the settings relating to the connection of
Bjong
to the Internet and
the data transmission.
The instrument, through the integrated modem, has the possibility of:
✓
Send stored historical data to the server
✓
Send alarm events to the server
✓
Send alarm events via SMS to multiple users
✓
Synchronize the time with an NTP server
✓
Send your configuration to the server
It is possible to combine the activation of each single function to make the instrument perform what you
need.
The modem supports three different ways of sending data:
1.
Through HTTP protocol;
2.
By CSV file transfer using FTP protocol;
3.
Sending MQTT messages to a broker.
For details on the protocol used for data exchange, contact the assistance service requesting
the specific descriptive technical document.
12.11.1
Connection parameters
In this section it is possible to configure the connection parameters for data
transfer (logs, events, configuration) and the NTP server for date and time
synchronization.
ID
: it is an identifier that is used in the data transmission
phase to distinguish between multiple instruments
installed.
Connection mode
: allows the user to select the connection
and data transfer mode between HTTP and FTP. Based on
the selection, the dedicated fields for configuration are then
displayed.