BM PRO BatteryCharge15, Руководство пользователя

Страница: 14 / 20

14
POWER SUPPLY MODE
Connect the BC15 to the mains supply and select Power Supply mode by
depressing and holding the Charge Rate selection button for 10+seconds
until the 3rd LED in the bottom row is illuminating constant orange.
Then connect your load being careful to connect the positive and negative
leads appropriately so that the load and
BC15 are not damaged.
Power Supply mode is limited to 10Amp output.
Failure to observe these instructions properly may
result in property damage, which may be serious
depending on the circumstances.
CAUTION
Part No. BC15
Type 7 Stage
Input (nominal) 220-240VAC, 50Hz
Input Power 270W
Nominal Output Voltage 14.6V
Minimum Start Voltage 6V
Output Current (Battery Charge
Mode) 5/10/15A*
Over Current (Power Supply
Mode) 15A
Back Drain <4mA
Deep Cycle 200Ah
Automotive 40-800CCA
Marine 55-900MCA
Types of Batteries Most types of lead acid batteries
including GEL, WET, AGM, Calcium
SPECIFICATIONS
* Maximum output may progressively derate above 30° down to half of the rated output at 50°