BM PRO BatteryCharge15, Руководство пользователя

Страница: 13 / 20

13
STEP 6 – CHARGING
During this process, the charging and ‘Fully Charged’ indicator lights will
flash in various patterns. This indicates the various stages of charge for your
battery.
When all of the top row LEDs remain steady, this indicates that the charger
is now in float stage and can remain connected to the battery indefinitely,
without over charging.
If at any point the Red LED begins to flash, this indicates that there is a
fault. Refer to “Fault Codes” Section of this document.
STEP 7 – DISCONNECTING
To disconnect from the battery once a full charge has been attained, remove
mains power to
BC15 , disconnect the negative battery terminal, disconnect
the positive battery terminal.
Note: This battery charger is not intended for charging a battery while
installed in a vehicle. Disconnect battery from vehicle before initiating the
above process.
BATTERIES
Note: This battery charger is rated to charge lead-acid battery types of
GEL, AGM, Calcium and/or WET, from 50-300Ah, (up to 500Ah float/trickle),
single units or in parallel.