BluStream HEX70HDU-KIT, Руководство пользователя

Страница: 6 / 21

HEX70HDU-KIT
USER MANUAL
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk
06
Automatic System On/Off Control
The HEX70HDU is designed to help automate basic control of AV equipment within a room without the need for a 3rd
party control system. It can control devices via RS-232 and relay outputs. Its key function is to turn the system on when
a video signal is sensed, and turn it off when that signal is lost.
Configuration of this functionality can be completed via RS-232. See the RS-232 Configuration and Telnet Commands
section at the rear of this manual for additional information and command API.
System On:
When the HEX70HDU detects video signal (via TMDS or 5V), the system will start and automatically perform the
following actions at the same time:
• Send RS-232 On Command, then delay (between 1~180s, default 3s), then send user defined RS-232 command
once configured via RS-232
• Toggle the state of relay 1 for a predetermined time (enabled by default, between 3~180s, default 10s, 0 is always
open while the unit is on)
Please note: when setting video signal trigger to TMDS or 5V, please ensure the System On and System Off settings
match or the feature may not operate correctly.
System Off:
When the controller detects the video signal is lost, and does not receive a signal sense trigger within the delay time
(between 5~180mins, default 10mins), the system will turn off and automatically perform the following actions:
• Send RS-232 Off Command, then delay (between 1~180s, default 3s), then repeat the command once configured
via RS-232
• Toggle the state of relay 2 for a predetermined time (enabled by default, between 3~180s, default 10s, 0s will turn
off when the unit turns stops sensing)
Relay Control
The HEX70HDU-RX features relay control to trigger external devices when a HDMI signal is sensed or lost.
By default when the unit is turned on or off, both relay 1 and 2 will open for 10 seconds and then close afterwards.
• For relay 1, the delay time can be set to 0 seconds which will keep the relay open when the unit is turned on, and
close the relay when the unit is turned off
• Relay 2 does not have this feature
For relay API commands, please see the RS-232 Configuration and Telnet Commands section at the rear of this
manual.
MOTORISED PROJECTOR SCREEN
12V
TRIGGER
POWER
SUPPLY
5V/12V