14
EN
Emptying the Water Tank
Please Note!
There are two possible ways to empty the water tank (10):
Drain Plug
Pull out the drain plug (7) on the bottom of the water tank and allow the water to drain
away.
Dismantling
Detach the water tank from the housing (13) (see the “Filling the Water Tank” chapter –
“Alternative Filling”) and pour away the rest of the water.
TROUBLESHOOTING
If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps below, contact the customer
service department.
The device does not work.
The mains plug is not inserted in the plug socket correctly.
>
Correct the fit of the mains plug.
The plug socket is defective.
>
Try another plug socket.
The device has not been switched on via the POWER fi eld (25).
>
Touch the POWER field.
The water tank (10) is empty. In this case, the pump is not working.
>
Fill the water tank.
The fuse in the fuse box is triggered.
Too many devices connected to the same circuit.
>
Reduce the number of devices in the circuit.
Do not attempt to repair an electrical device yourself!
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 14
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 14
03-12-2020 16:00
03-12-2020 16:00