10
EN
SWING (23)
Activate / deactivate rotation
When this function is active, the vertical slats of the ventilation grille (3) automatically
swing from one side to the other.
COOL (24)
Activate / deactivate cooling and humidification
Please Note!
This function can only be used with a filled water tank (10).
When this function is active, the water is pumped from the water tank into the water tray
(17) and from there it runs out over the honeycomb filters (4) back into the water tank. In
the process, the honeycomb filters are moistened and thus cool the air flow. In addition,
the air is humidifi ed.
Once the water in the water tank has been used up, you will hear beeps
and the COOL control lamp flashes. The pump switches off automatically.
POWER (25)
Switch the device on / off
Remote Control
The buttons on the remote control
(Picture D) correspond to the functions of the
operating elements on the control panel (2). Only
the function of the COOL button is different.
Whereas the COOL fi eld (24) on the control panel
is intended both for activating and deactivating
the cooling and humidifi cation, this function can
only be activated using the COOL button on the
remote control. To deactivate the function and
accordingly switch to pure ventilation without
cooling, the WIND button on the remote control
must be pressed.
FILLING THE WATER TANK
Please Note!
•
Only ever fill the water tank with cold tap water. Do not use any other liquids.
•
Do not overfill the water tank (max. 10 l)! Electrical components could be damaged.
Increased risk of an electric shock.
D
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 10
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 10
03-12-2020 16:00
03-12-2020 16:00