28
EN
6. Close the drawer with its cover. Empty out the drawer only if you are sure
that the combustion material does not glow or burn anymore. For the
disposal of combustion residuals all local legislative regulations have to be
respected.
Empty out the drawer only if you are sure that the combustion material does
not glow or burn anymore. For the disposal of combustion residuals all local
legislative regulations have to be respected.
Now, after the first ignition and subsequent cleaning, the heater is ready for
normal use.
How to load, fire up, unload and reload the heater
Please, read carefully the entire instruction manual.
Loading and firing up:
1. Open the front door of the base.
2. Extract the burner.
3. Load the burner with the desired and allowed quantity of pellet. In the
following schedule there is the help for the correct quantity of pellet.
KG PELLET
FLAME DURATION
3 kg
about 1.5 hours
4 kg
about 2 hours
5 kg
about 2.5 hours
6 kg
about 3.5 hours
7 kg
about 4.5 hours
9 kg
about 6 hours
4.
To fire up the heater you have to use 2/3 pieces of an ecological
firelighter and fire them up (the use of inappropriate firelighter can
provoke the malfunction of the system).
5.
You make sure that the combustion has started so put the flame-reducer
on the burner. During the ignition you should be ensured that everything
is equipped properly for the correct functioning.
6. Reinsert the burner inside the base of the heater and lock the door. Put
the key in a safe place.
It will be necessary to wait for 10 minutes before that the flame starts to
come out from the glass tube.
Throughout the combustion do not open the door of the base.
