Bluezone 420 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 2 / 38

Document #: BPI-PM001-01
1
IMPORTANT SAFEGUARDS
READ AND SAVE THESE INSTRUCTIONS
Safety
This operation and service manual contains
important instructions and safety information
about the Bluezone Air Purification System.
Observe the following dangers, warnings,
cautions and notices when installing,
operating and servicing the Bluezone Model
420.
Electrical System
Energized electrical circuits present a
potentially life-threatening hazard.
Ensure the unit’s power cord is unplugged
before performing any installation or service
work.
Ensure there are no other electrical power
circuits connected to the Bluezone Model
420.
Do Not Operate unit with a damaged cord or
plug. Discard unit or return to an authorized
service facility for repair.
Follow all lockout/tagout procedures for all
electrical circuits.
System Operation
Do not operate the Bluezone Model 420
while fogging
with chlorine bleach or other
disinfectant solutions. Disinfectants can
poison the Bluezone catalyst and reduce its
effectiveness.
•
Turn off the Bluezone Units if
disinfectant fogging or cleaning is
underway.
Turn Bluezone units back on after
disinfectants have dissipated. Never hose
down the Bluezone Model 420 or clean with a
water jet. Direct flow of water onto the catalyst
can reduce its effectiveness in eliminating
ozone.
Turn off Bluezone units and cover with plastic
if the room is being hosed with water or
steam.
System Maintenance
The Bluezone Model 420 contains 4 UV-C
light bulbs; the UV light is completely
contained inside the unit during operation.
Unplug or disconnect the unit from power
source prior to any servicing.
The Bluezone Model 420 has multiple safety
systems to ensure that you cannot view the
UV bulbs while they are operating.
Do NOT attempt to override the cover switch
to allow the bulbs to operate when the cover
is off.