BluEye Pioneer, Руководство пользователя, Страница: 27 / 44

27
Charging the batteries
Before charging the drone make sure that the drone
is turned off. Connect the power supply to the
charger and connect the power supply to the wall
socket. Make sure that the charging selector switch
on the bottom is set to drone charging. See page 7.
Place the drone on a robust and stable surface
laying on the left side to remove any risk of the
drone falling over.
Unscrew the charging connector cap on the drone
and connect the charger to the charging port on
the drone with the included charging cable.
Open the connector lid on the Surface Unit and
connect an output of the external USB charger to
the charging port (micro USB) on the Surface Unit.
Make sure the USB output rating is minimum 2.1A.
Connect the other USB outputs on the external
USB charger to charge a mobile device and the
controller.
To disconnect the power supply from the mains,
pull the plug from the wall socket outlet. Make sure
that the wall socket outlet is easily accessible.
Do not turn the drone on while charging, it may dam-
age the drone and/or charger. When finished charging
remember to put the charging connector cap back on.
> 1,5 m/s
150 m