Bluewater Pro, Руководство пользователя

Страница: 8 / 172

08
Owner’s manual
Water production
Only use the cleaned water when the lights “Purification level II and III” on the
control panel are on. It can take up to 60 seconds before the water purifier
indicates good water quality.
For models suitable for commercial use the faucet could be replaced by for example a valve or
a tank.
Figure 5.
2 1
Water production on/off
Automatic flush
The length of the flush process varies between 5-120 seconds, depending on how long the
previous drawing of water lasted.
An automatic flush will be performed if one of the conditions below are fulfilled:
Figure 6.
1 2 3
+
12 h
15 min
5-120 s
Automatic flush
Pos Description
1 Flush after drawing water. Every time after drawing water.
2 Flush when drawing water. After maximum operation time 15 minutes. (Pro 400B must be manually restarted)
3 Water purifier in standby mode. Pro is connected to water and power. Flush is performed every 12 hours, regardless of when clean
water was last produced.