EN
EN
>
39
38
<
Operating instructions
Switch
The ON/OFF button is located on the control
panel. Press this button for a longer time
to activate the e-scooter. The indicator
lights switches on. Pressing the button
for a longer time turns off the e-scooter.
Warning: Release the throttle/reduce
speed before braking.
Speed regulation control
Use the Accelerator to control
the speed
1. Accelerator/throttle lever
2. Speed display
3. Battery capacity
4. Speed gear
5. Numeric value of the selected
function
6. Safety locker
Riding the e-scooter
Preparation before riding
1. Find a suitable place.
2. Unfold the e-scooter according to the specified instructions. See Step 2 Folding
the e-scooter.
3. Adjust the handlebar height
4. The front light is not rigidly attached to the frame for safety during transport. Screw
the light to the frame and set it in the correct position. Then tighten the fastening screw.
5. Ascertain that the handlebar is parallel to your body before starting the e-scooter.
6. Before using the e-scooter, visually check that all nuts and bolts are tight and
in place. If a component is missing or shows signs of wear or tear or you are
not sure about the technical condition, bring the e-scooter to an authorized
service center for inspection.
7. Always check the brakes and mechanical functions before each ride.
8. Ascertain that the safety switch is inserted into the center of the folding mechanism
and all locks are secure.
Riding on the electric e-scooter
1. Press the power button (ON/OFF) for more than 3 seconds to activate the e-scooter.
2. For a safer start, start with the help of another person. First place one foot on the deck
of the e-scooter, leaving the other foot securely on the ground. Slowly press the throttle.
3. When the e-scooter starts moving, place the other foot on the e-scooter, press
the throttle, accelerate.
4. To activate the electric e-scooter drive from zero speed, it is necessary to push off sev-
eral times from the ground to achieve a certain speed. You can then use the control
levers on the handle to add gas and accelerate the e-scooter (setting P5 – value
1). If the P5 is set to 0, you do not need to push off to activate the electric drive.
5. When braking, tilt your weight backwards so that the braking effect comes across
the legs rather than the handlebars and steering.
Stopping the e-scooter
Squeeze the brake slightly to reduce power to the engine and reduce the speed. Place
one foot on the ground after braking. Never abruptly brake or stand on the brakes,
it may lead to faster wear on the braking mechanism and consequently reduce comfort
from riding.
Automatic shutdown
When the e-scooter is stopped (speed = 0) and you do not intervene with the display
for more than 3 minutes, the system will automatically shut down and save energy.
TIP:
To accelerate, tilt forward, moving your weight backwards when braking.
2
3
5
4
1
6
