- 28 -
Choose your Security. If Open is chosen (No security) radio will connect. However
having No security is not recommended. If any other security (WEP, WPA, WPA2) is
chosen, display will show:
If WEP is chosen: If WPA is chosen: If WPA2 is chosen:
Choose your desired setting. Display will show:
Enter “Key” by using “TUNE” knob on front panel.
Turn “TUNE” knob to choose between numbers, letters, capital letters or special
characters.
Enter key using >>| <<| buttons on front panel to choose correct number/letter and
press “TUNE” knob on front panel to confirm.
When whole key is entered correctly choose
to proceed. Choose “<” to clear and
“C” to cancel.
Radio will connect.
10.6 Time Setup
Please go to page 10 7. Setting the time and date
10.7 Factory Reset
Go to “MAIN MENU”
Use navigation key LEFT to go back in the menu. Press several times until “MAIN
MENU” is an option in the menu. Choose “MAIN MENU” by pressing “TUNE” knob
on front panel. From the main menu choose “System setup” From system setup
choose “Factory reset” Display will show:
Press “INFO” on front panel to confirm reset. By doing this the radio will restart with
the factory settings. This also means that all connections has to be configured again.
A factory reset may be necessary if the radio is not functioning correctly or
menu/display is acting up.
10.8 Software upgrade
This feature is NOT to be used. This can seriously damage the radio and should only
be used by qualified service personel.
>Open
PSK
>TKIP
AES
>TKIP
AES
Key:
0123456789<
C
Press ‘INFO’ to
confirm reset
